BREWINTOSH V1.0 - STL FILES

BREWINTOSH - V1.0

After receiving numerous requests for the 3D model of the Brewintosh featured in my video, I have decided to release the STL files.

Before purchasing, please note the following:

1. The files were initially created for personal use, not for public distribution. Therefore, some parts may not meet your expectations.
2. Some components used in the video may no longer be available, as I used second-hand parts (e.g., the 10.1-inch screen from 2008 and the HP T520 Thin Client from 2014 are no longer manufactured).
3. None of the parts can be used as replacements for an original Macintosh 128k due to different Dimensions.
4. These files are designed for a printer with a minimum print size of 400x400x250mm. Some parts may require resin printing.
5. You should have sufficient experience with 3D printing.
6. The purchase includes only the 3D model as STL files in splitted Parts.
7. No manual or building instructions are included.
8. No electrical/electronic information is provided due to safety concerns.
9. There is no support included with these files. I will not respond to questions or assist with any issues related to this build.
10. I will not accept refunds after purchase.

+++ This product is for personal use only. You are not permitted to reupload, distribute the files, or sell physical products made from these files. +++

Here are some links to some of the components and software that I used:

HP T520 Thin Client - No Link Available

TVS LP-10R02 Screen - No Link Available

Spray paint: https://geni.us/EB07

USB Floppy Drive: https://geni.us/zDHggUR

Stepper Motor + Driver: https://geni.us/6sXVUEj

Motor/LED Dimmer Module: https://geni.us/tFl7e

ATmega32u4 Microcontroller: https://geni.us/oS1q6AL

Digispark Microcontroller: https://geni.us/Wb48Hf

USB Cardreader: https://geni.us/8Ct75v

Resin 3D Printer: https://geni.us/59HqZz

Active USB-HUB: https://geni.us/wEWkEX

4-Port USB HUB: https://geni.us/UkaBg7p

M3-Screws(Mostly for inner Frame): https://geni.us/WbVFD

M2.5-Screws to mount Floppy Drive: https://geni.us/96Bk

IEC Connector Socket: https://geni.us/Dtzr8o

Built-in Rocker Switch: https://geni.us/oAcCr

Replacement S-Video 6-pin Socket: https://geni.us/vPKH5D

WAGO Connector: https://geni.us/JEySP

Mp3 Soundmodule: https://geni.us/OoSz3u

Relais Module: https://geni.us/JWueEBB

1.7mm diameter registration pins: https://geni.us/tRjvkQB

Software:
TMK-Keyboard Firmware: https://github.com/tmk/tmk_keyboard

MinivMac: https://www.gryphel.com/c/minivmac/